INCAS BULLETIN


Go to content

Volume 10 Issue 3/2018

DOI: 10.13111/2066-8201.2018.10.3; https://doi.org/10.13111/2066-8201.2018.10.3


Vol.10, Iss. 3, full-cover

CONTENTS

 


Full Papers, pp. 1-2

Full Text

Irina-Carmen ANDREI, Gabriela STROE, Computational Study in Centrifugal Compressor, pp. 3-14, DOI: 10.13111/2066-8201.2018.10.3.1; https://doi.org/10.13111/2066-8201.2018.10.3.1

Irina-Carmen ANDREI, Gabriela STROE, Numerical Simulations of Flow in Axial Compressor System, Preparatory Steps for Active Control, pp. 15-26, DOI: 10.13111/2066-8201.2018.10.3.2; https://doi.org/10.13111/2066-8201.2018.10.3.2

Viorel ANGHEL, Integral Method for Structural Analysis of Beams with Bending-Torsion Coupling, pp. 27-36, DOI: 10.13111/2066-8201.2018.10.3.3; https://doi.org/10.13111/2066-8201.2018.10.3.3

Agneta M. BALINT, Stefan BALINT, A 2D description of the single crystal thin plate growth from the melt by micro - pulling - down method. Part 1, pp. 37-52, DOI: 10.13111/2066-8201.2018.10.3.4; https://doi.org/10.13111/2066-8201.2018.10.3.4

Agneta M. BALINT, Stefan BALINT, A 2D description of the single crystal thin plate growth from the melt by micro - pulling - down method. Part 2, pp. 53-64 ,DOI: 10.13111/2066-8201.2018.10.3.5; https://doi.org/10.13111/2066-8201.2018.10.3.5

Nastase-Dan CIOBOTA, Paul STANCIU, Gheorghe Ion GHEORGHE, 3D Complex Structures through Layer Plastic Deposition Designed for Carbon Material Impregnation, pp. 65-74, DOI: 10.13111/2066-8201.2018.10.3.6; https://doi.org/10.13111/2066-8201.2018.10.3.6

Calin-Dumitru COMAN, George PELIN, Thermal Effects on Single - Lap, Single - Bolt, Hybrid Metal - Composite Joint Stiffness, pp. 75-88, DOI: 10.13111/2066-8201.2018.10.3.7; https://doi.org/10.13111/2066-8201.2018.10.3.7

Stefan HOTHAZIE, Camelia MUNTEANU, Mihaela NASTASE, Radu BIBIRE, Analysis of isogrid reinforced cylindrical vessels in the case of axially symmetric buckling, pp. 89-101, DOI: 10.13111/2066-8201.2018.10.3.8; https://doi.org/10.13111/2066-8201.2018.10.3.8

Ihsan ULLAH, Hai-Long PEI, Disturbance observer based sliding mode control for unmanned helicopter hovering operations in presence of external disturbances, pp. 103-118, DOI: 10.13111/2066-8201.2018.10.3.9; https://doi.org/10.13111/2066-8201.2018.10.3.9

Nicolae MARCOV, Calculation of the zeros of some special functions, pp. 119-126, DOI: 10.13111/2066-8201.2018.10.3.10; https://doi.org/10.13111/2066-8201.2018.10.3.10

Alexandru-Iulian ONEL, Tudorel-Petronel AFILIPOAE, Ana-Maria NECULAESCU, Mihai-Victor PRICOP, MDO approach for a two-stage microlauncher, pp. 127-138, DOI: 10.13111/2066-8201.2018.10.3.11; https://doi.org/10.13111/2066-8201.2018.10.3.11

Marilena D. PAVEL, Achim IONITA, Helicopter Roll-Axis Instabilities induced by Pilot Cyclic Control: A Physical Explanation, pp. 139-156, DOI: 10.13111/2066-8201.2018.10.3.12; https://doi.org/10.13111/2066-8201.2018.10.3.12

R. NAVEEN, Aerodynamic Analysis of C-Wing Aircraft, pp. 157-165, DOI: 10.13111/2066-8201.2018.10.3.13; https://doi.org/10.13111/2066-8201.2018.10.3.13

Haci SOGUKPINAR, Numerical Calculation of Wind Tip Vortex Formation for Different Wingtip devices, pp. 167-176, DOI: 10.13111/2066-8201.2018.10.3.14; https://doi.org/10.13111/2066-8201.2018.10.3.14

Adriana STEFAN, Cristina Elisabeta PELIN, George PELIN, Daniela STELESCU, Nanofilled EPDM composite for aerospace applications, pp. 177-184, DOI: 10.13111/2066-8201.2018.10.3.15; https://doi.org/10.13111/2066-8201.2018.10.3.15

Technical-Scientific Notes and Reports, pp. 185-186

 

Daniela BARAN, Simion TATARU, Mihaela PETRE, Preliminary Estimation Methods for the Definition of the Landing Gear, pp. 187-197, DOI: 10.13111/2066-8201.2018.10.3.16; https://doi.org/10.13111/2066-8201.2018.10.3.16

Index, pp. 199-201

Instruction and Editing Model, pp. 203-207

Publication Ethics And Publication Malpractice Statement, pp. 208

Archives 2009 - 2018

https://creativecommons.org/licenses/by-nc-nd/4.0/

Top

 

Home Page | Editorial Board | OA Statement | Publications Ethics | Aims and Scope | Peer review | Notes for Authors | Archives 2009-2018 | Quotes in Database | Distribution | Editorial Office | Announcements | Site Map


Back to content | Back to main menu