INCAS BULLETIN


Go to content

Volume 13 Issue 1/2021

DOI: 10.13111/2066-8201.2021.13.1; https://doi.org/10.13111/2066-8201.2021.13.1

Vol. 13, iss. 1, full cover

CONTENTS

Full text

FULL PAPERS, pp. 1-2

 

Yassir ABBAS, Tariq ELSONNI, Abdul Aziz ABDULMAJID, Alnazir KHALAFALLH, Mohammed ALNAZIR, Structural Analysis of a Transport Aircraft Wing, pp. 3-9, DOI: 10.13111/2066-8201.2021.13.1.1; https://doi.org/10.13111/2066-8201.2021.13.1.1

Viorel ANGHEL, Stefan SOROHAN, Bending Vibration Analysis of Nanobeams using the Nonlocal Motion Equations Solved by an Integral Approach, pp. 11-18, DOI: 10.13111/2066-8201.2021.13.1.2; https://doi.org/10.13111/2066-8201.2021.13.1.2

Andreea CALCAN, Sabina STEFAN, Sorin Nicolae VAJAIAC, Denisa MOACA, Airborne measurements in different clouds, pp. 19-28, DOI: 10.13111/2066-8201.2021.13.1.3; https://doi.org/10.13111/2066-8201.2021.13.1.3

Calin-Dumitru COMAN, Influence of Preload on Failure Modes of Hybrid Metal-Composite Protruding Bolted Joints, pp. 29-41, DOI: 10.13111/2066-8201.2021.13.1.4; https://doi.org/10.13111/2066-8201.2021.13.1.4

Horia DUMITRESCU, Vladimir CARDOS, Radu BOGATEANU, Gravitational waves on Earth and their warming effects, pp. 43-54, DOI: 10.13111/2066-8201.2021.13.1.5; https://doi.org/10.13111/2066-8201.2021.13.1.5

G. GOWTHAM, G. SHIVA SAM KUMAR, AASA DARA, Design and Optimization of Lug Bracket Assembly, pp. 55-67, pp. 55-67, DOI: 10.13111/2066-8201.2021.13.1.6; https://doi.org/10.13111/2066-8201.2021.13.1.6

Aynul HOSSAIN, Conceptual Design of a Low - Cost Linear Actuator for Variable Span Wing Application, pp. 69-76, DOI: 10.13111/2066-8201.2021.13.1.7; https://doi.org/10.13111/2066-8201.2021.13.1.7

Mihai-Vladut HOTHAZIE, Sterian DANAILA, Effects of the boundary layer control methods on stability and separation point, pp.77-87, DOI: 10.13111/2066-8201.2021.13.1.8; https://doi.org/10.13111/2066-8201.2021.13.1.8

V. KIRUBAKARAN, David BHATT, Experimental Prediction of Lean Blowout Limits for 3kW Micro Gas Turbine Combustor fuelled with LPG, pp. 89-95, DOI: 10.13111/2066-8201.2021.13.1.9; https://doi.org/10.13111/2066-8201.2021.13.1.9

Balakrishna Reddy KUNCHALA, Suresh GAMINI, Nagarjuna MAGULURI, Observations of human muscle response during daily life activities of biped kinematics using a musculoskeletal simulator, pp. 97-104, DOI: 10.13111/2066-8201.2021.13.1.10; https://doi.org/10.13111/2066-8201.2021.13.1.10

Mihaela MANEA, Adrian BURGHIU, Lift Interference in Wind Tunnels with Perforated and Solid Walls, pp. 105-111, DOI: 10.13111/2066-8201.2021.13.1.11; https://doi.org/10.13111/2066-8201.2021.13.1.11

Alexandru Marius PANAIT, Improved Timing for better performance of distributed data acquisition systems, pp. 113-122, DOI: 10.13111/2066-8201.2021.13.1.12; https://doi.org/10.13111/2066-8201.2021.13.1.12

Cristina-Elisabeta PELIN, Gilbert Mihaita STOICAN, Adriana STEFAN, Mihai Victor PRICOP, Sorina ILINA, George PELIN, Mechanical properties of 3D printed metals, pp. 123-129, DOI: 10.13111/2066-8201.2021.13.1.13; https://doi.org/10.13111/2066-8201.2021.13.1.13

George PELIN, Nanometric SiC influence on tribological properties of phenolic composite materials, pp. 131-140, DOI: 10.13111/2066-8201.2021.13.1.14; https://doi.org/10.13111/2066-8201.2021.13.1.14

Alexandru Valentin RADULESCU, Irina RADULESCU, Experimental Study on Rheology of Animal Fats, pp. 141-148, DOI: 10.13111/2066-8201.2021.13.1.15; https://doi.org/10.13111/2066-8201.2021.13.1.15

M. RAJA, Ugur GUVEN, Design of Obstacle Avoidance and Waypoint Navigation using Global position sensor/ Ultrasonic sensor, pp. 149-158, DOI: 10.13111/2066-8201.2021.13.1.16; https://doi.org/10.13111/2066-8201.2021.13.1.16

M. RAJA, Gaurav ASTHANA, Ajay SINGH, Ashna SINGHAL, Pallavi LAKRA, Orbit Design and Trajectory Analysis of satellite in Low Earth Orbit, pp. 159-172, DOI: 10.13111/2066-8201.2021.13.1.17; https://doi.org/10.13111/2066-8201.2021.13.1.17

J. SANKAR, S. SURESH KUMAR, Synthesis and Characterization of Nano Cerium Oxide Using Hydrothermal Technique, pp. 173-181, DOI: 10.13111/2066-8201.2021.13.1.18; https://doi.org/10.13111/2066-8201.2021.13.1.18

Adriana STEFAN, George PELIN, Cristina-Elisabeta PELIN, Alexandra-Raluca PETRE, Monica MARIN, Manufacturing process, mechanical behavior and modeling of composites structures sandwich panel , pp. 183-191, DOI: 10.13111/2066-8201.2021.13.1.19; https://doi.org/10.13111/2066-8201.2021.13.1.19

Nicolae-Alexandru STOICA, Alina-Maria STOICA, Andrei TUDOR, Victor MANOLIU, Mihail BOTAN, George Catalin CRISTEA, Correlation between the anisotropy of an AA2021-T351 aluminium rolled thick plate and the occurrence of the stick-slip phenomenon, pp. 193-201, DOI: 10.13111/2066-8201.2021.13.1.20; https://doi.org/10.13111/2066-8201.2021.13.1.20

A. TORRE-POZA, A. M. R. PINTO, T. GRANDAL, N. GONZÁLEZ-CASTRO, L. CARRAL, E. RODRÍGUEZ-SENÍN, Challenges of complex monitoring of the curing parameters in coupons for LRI manufacturing, pp. 203-210, DOI: 10.13111/2066-8201.2021.13.1.21; https://doi.org/10.13111/2066-8201.2021.13.1.21

P. UMAMAHESWARRAO, D. RANGARAJU, K. N. S. SUMAN, B. RAVISANKAR, Application of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steel, pp. 211-224, DOI: 10.13111/2066-8201.2021.13.1.22; https://doi.org/10.13111/2066-8201.2021.13.1.22

Ioana VIZIREANU, Andreea CALCAN, Georgiana GRIGORAS, Dan RADUCANU, Detection of trees features from a forestry area using airborne LiDAR data, pp. 225-236, DOI: 10.13111/2066-8201.2021.13.1.23; https://doi.org/10.13111/2066-8201.2021.13.1.23

Marius-Alexandru VOICU, Ion FUIOREA, Mean corrective maintenance time for a medium courier turboprop aircraft, pp. 237-243, DOI: 10.13111/2066-8201.2021.13.1.24; https://doi.org/10.13111/2066-8201.2021.13.1.24

TECHNICAL-SCIENTIFIC NOTES AND REPORTS, CASE STUDIES, pp. 245-246

 

Claudia DOBRE, Aviation world rethinking strategies after COVID-19 crise, pp. 247-256, DOI: 10.13111/2066-8201.2021.13.1.25; https://doi.org/10.13111/2066-8201.2021.13.1.25

Valentin Marian IORDACHE, Sorin Eugen ZAHARIA, Casandra Venera PIETREANU, Risk Management and Organizational Considerations for Enhancing Safety State Given the Continuous Technological Development Processes, pp. 257-262, DOI: 10.13111/2066-8201.2021.13.1.26; https://doi.org/10.13111/2066-8201.2021.13.1.26

Mária MRÁZOVÁ, Antonín KAZDA, The direction of airlines business models – up or down? (Post Covid-19 crisis – case study), pp. 263-267, DOI: 10.13111/2066-8201.2021.13.1.27; https://doi.org/10.13111/2066-8201.2021.13.1.27

INDEX, pp. 275-280

INSTRUCTIONS AND EDITING MODEL, pp. 281-285

PUBLICATION ETHICS AND PUBLICATION MALPRACTICE STATEMENT, pp. 286

 

https://creativecommons.org/licenses/by-nc-nd/4.0/

 

Top

 

Home Page | Editorial Board | OA Statement | Publications Ethics | Aims and Scope | Peer review | Notes for Authors | Archives 2009-2021 | Quotes in Database | Distribution | Editorial Office | Site Map


Back to content | Back to main menu