INCAS BULLETIN


Go to content

Volume 13 Issue 4/2021

DOI: 10.13111/2066-8201.2021.13.4; https://doi.org/10.13111/2066-8201.2021.13.4


Vol. 13, iss. 4, full cover

 

CONTENTS

 

Full text

FULL PAPERS, pp. 1-2

 

Agneta M. BALINT, Stefan BALINT, The mathematical description of the bulk fluid flow and that of the content impurity dispersion, obtained by replacing integer order temporal derivatives with general temporal Caputo or general temporal Riemann-Liouville fractional order derivatives, are objective, pp. 3-16, https://doi.org/10.13111/2066-8201.2021.13.4.1

Sujith BOBBA, Z. LEMAN, B. HARISH BABU, Environmental effects on the mechanical properties of E-glass and S-glass fiber epoxy composite ring specimens used in aircraft fuel pipes, pp. 17-24, https://doi.org/10.13111/2066-8201.2021.13.4.2

Ilinca-Laura BURDULEA, Alina BOGOI, Some aspects in Kelvin-Helmholtz instability with and without Boussinesq approximation, pp. 25-33, https://doi.org/10.13111/2066-8201.2021.13.4.3

Calin-Dumitru COMAN, Thermal Influence on the Stiffness of Hybrid Metal-Composite Countersunk Bolted Joints, pp. 35-45, https://doi.org/10.13111/2066-8201.2021.13.4.4

George Catalin CRISTEA, Adriana STEFAN, George PELIN, Cristina-Elisabeta PELIN, Maria SONMEZ, Sorina ILINA, Lorena DELEANU, Mechanical and tribological behaviour of PA6 and short aramid fiber composites, pp. 47-58, https://doi.org/10.13111/2066-8201.2021.13.4.5

Ahmed ELWETEEDY, Ali ELMAIHY, Ahmed ELHEFNAWY, Small Satellite Operational Phase Thermal Analysis and Design: A Comparative Study, pp. 59-74, https://doi.org/10.13111/2066-8201.2021.13.4.6

Matúš GREGA, Pavel NECAS, Branislav LANCIK, Virtual Reality Safety Limitations, pp. 75-86, https://doi.org/10.13111/2066-8201.2021.13.4.7

Gabriela IOSIF, Iulian IORDACHE, George SUCIU, Romulus CHEVERESAN, Gabriela BUCUR, Ioana PETRE, Sabina BOSOC, Concurrent Engineering and based Applications for 3D Big Data, pp. 87-97, https://doi.org/10.13111/2066-8201.2021.13.4.8

Satya Prasad MADDULA, Vasishta Bhargava NUKALA, Venkata Swamy Naidu NEIGAPULA, Trailing Edge Thickness Effect on Tonal Noise Emission Characteristics from Wind Turbine Blades, pp. 99-111, https://doi.org/10.13111/2066-8201.2021.13.4.9

Paul MEYRAN, Hugo PAIN, Ruxandra Mihaela BOTEZ, Jeremy LALIBERTÉ, Morphing Winglet Design for Aerodynamic Performance Optimization of the CRJ-700 Aircraft. Part 1 – Structural Design, pp. 113-128, https://doi.org/10.13111/2066-8201.2021.13.4.10

Paul MEYRAN, Hugo PAIN, Ruxandra Mihaela BOTEZ, Jeremy LALIBERTÉ, Structural Design and Control of a Morphing Winglet to optimize the Aerodynamic Performance of the CRJ-700 Aircraft. Part 2 – Control, pp. 129-137, https://doi.org/10.13111/2066-8201.2021.13.4.11

P. MUTHU, An investigation on dry sliding wear behavior of Al6061/ Titanium carbide/ Basalt hybrid metal matrix composites, pp. 139-150, https://doi.org/10.13111/2066-8201.2021.13.4.12

Aravind SEENI, Effect of Turbulence Models in Performance Characterization of a Low Reynolds Number UAV Propeller, pp. 151-166, https://doi.org/10.13111/2066-8201.2021.13.4.13

Andra TOFAN-NEGRU, Cristian BARBU, Amado STEFAN, Ioana-Carmen BOGLIS, Analysis and characterization of additive manufacturing processes, pp. 167-180, https://doi.org/10.13111/2066-8201.2021.13.4.14

Marius-Alexandru VOICU, Ion FUIOREA, The influence of weight on fuel consumption and range for a turboprop medium courier aircraft, pp. 181-193, https://doi.org/10.13111/2066-8201.2021.13.4.15

TECHNICAL-SCIENTIFIC NOTES AND REPORTS, CASE STUDIES, pp. 195-196

 

Daniela BARAN, Mihaela PETRE, Hydrostatic pressure loads for a tank using “CID Distributed Loads” fields in a PATRAN FEM model, pp. 197-204, https://doi.org/10.13111/2066-8201.2021.13.4.16

Ilie NICOLIN, Bogdan Adrian NICOLIN, Failure Mode and Effect Analysis for a military nose landing gear project, pp. 205-212, https://doi.org/10.13111/2066-8201.2021.13.4.17

Peter STASTNY, Adrian-Mihail STOICA, Safety Management for Unmanned Aviation, pp. 213-228, https://doi.org/10.13111/2066-8201.2021.13.4.18

INDEX, pp. 229-232

INSTRUCTIONS AND EDITING MODEL, pp. 233-237 ( .pdf)

.docx

PUBLICATION ETHICS AND PUBLICATION MALPRACTICE STATEMENT, pp. 238

   

 

https://creativecommons.org/licenses/by-nc-nd/4.0/

 

top

 

 

 

Home Page | Editorial Board | OA Statement | Publications Ethics | Aims and Scope | Peer review | Notes for Authors | Archives 2009-2024 | Quotes in Database | Distribution | Editorial Office | Site Map


Back to content | Back to main menu